Coming to the App Store and Google Play
Service history in iDrive, written from your phone.
Bimlogic is a phone app for F- and G-series BMWs. Over an ENET cable or wifi adapter it writes service entries to iDrive, reads fault codes from every control unit and logs live engine values.
Planned price: €39.95 per year. Independent project, not made, endorsed or approved by BMW.
Live demo with a made-up car. Press the button.
Service history
A real entry in iDrive, not just a reset.
After a service, write the date, mileage, your own workshop code and the items you did. The entry shows up under Vehicle info > Service history, the same place a dealer entry does.
iDrive lists entries in the order they were written, so a new one lands at the bottom. History order erases the list and writes every entry back, newest first.
- Your own workshop code, never a dealer code
- Only for maintenance that was really done
- A written entry cannot be changed or deleted one by one
In iDrive
The list as the car shows it.
Diagnostics
Every control unit, one tap.
Read the fault memory of all control units at once. Each fault shows its code, whether it is present or stored, the description and a short hint on where to look.
Reading changes nothing in the car. Clearing always asks first.
- Descriptions are machine-translated from German
- Hints are general pointers, not BMW repair instructions
Fault codes
Reads the fault memory of all control units.
Live data
Watch the engine while it works.
Engine values, live. Plot them against time or against engine speed, pick the channels you care about and record a run to a CSV file.
Read-only. There are channel sets for the F-series engines, shown in the units you choose. If a control unit does not know a value, the app leaves it out and tells you.
- Graph against time or RPM
- Each channel in its own colour, with its range
- Dashboard view, and logs you can open and compare later
Engine values
Stopped
time
In the graph
Simulated values, not a real log.
Coding
GTS settings for your M3 or M4.
Read the coding of the stability control, the steering and the differential, keep it as a backup, and write the GTS settings to an F8x M car. The app shows what will change before it writes anything.
Coding changes how the car drives. It is intended for use off public roads only, and at your own risk. Tested on one car: an F82 M4, back to standard and to GTS again.
- A backup of the coding before anything is written
- One control unit at a time, with the difference shown first
- A write check that changes nothing tells you if a unit accepts coding
GTS settings
BMW M4 Coupé (F82)
Example screen with a made-up car.
Everything in the app
Each function is marked: it only reads from the car, it writes to the car or operates a part, or it stays on your phone. Which functions you see depends on the car: many appear only after the car has confirmed it supports them.
Vehicle
- Find and identify the carReads
- Vehicle check with a verdict at a glanceReads
- Factory options from the vehicle orderReads
- Mileage compared between control unitsReads
- Usage history: engine hours and gearbox countersReads
- PDF report for buying or for sellingOn phone
- A file per car with your notesOn phone
Maintenance
- Write service history to iDriveWrites
- History order, newest on topWrites
- Reset service intervalsWrites
- Register a new batteryWrites
- Tyre pressure resetWrites
- Brake bleeding with the ABS pumpOperates
- Battery and charging valuesReads
- Service reminders, also as a calendar fileOn phone
Diagnostics
- Read fault codes of all control unitsReads
- Fault details with freeze frameReads
- PDF report with your own logoOn phone
- Clear fault codesWrites
Engine
- Cylinder balanceReads
- Injector valuesReads
- Diesel values: oil level and particulate filterReads
- Injector codingWrites
- Exhaust flap controlOperates
- Component tests: fan, thermostat, tank venting, air flapsOperates
- Clear engine and gearbox adaptationsWrites
Logging
- Live data with graphReads
- Dashboard with shift lightReads
- Saved logs, side by sideOn phone
- Import logs from MHDOn phone
- Acceleration times from a logOn phone
- Share the times as an imageOn phone
Body
- Window initialisationOperates
- Sunroof initialisationOperates
- Headlight levelling reference runOperates
- Parking brake service positionOperates
Coding and chassis
- Coding backup of DSC, steering and differentialReads
- Coding write check: can this control unit be coded?Writes
- GTS settings for F8x M carsWrites
- Differential lock testOperates
Connection
- ENET cable or wifi adapterOn phone
- Joins the adapter’s wifi by itselfOn phone
- Shows only functions the car confirmsReads
Support
- How-to guide in the appOn phone
- Problem report you can shareOn phone
Road use
Functions marked Writes or Operates can change how the car behaves. Those changes are intended only for use off public roads, and everything you do with the app is at your own risk. See the Terms of Use.
Where it stands today
The app is still being built and tested. This is the honest state of each part.
Find vehicle
Finds the car on the network and shows model, VIN, build date and factory options. Tested on an F82 M4. Connecting also worked on a 2017 G30.
Service history
Writes an entry to iDrive. Tested on an F82 with the NBT head unit. Other head units are not confirmed yet.
Diagnostics and vehicle check
Reading fault codes, the vehicle check, mileage comparison, battery values, usage history and the PDF reports are tested on the F82.
Live data
Logging works on the F82 with the S55 engine. On a 2017 G30 the engine control unit refused the request; the fallback for that is not confirmed yet.
Engine
Component tests, exhaust flap, injector values, cylinder balance and resetting the idle adaptation are tested on the S55. Signals can differ on other engines.
Coding and chassis
Coding backup, GTS settings, the differential lock test and brake bleeding are tested on the F82.
Body
Tyre pressure reset, window initialisation and the headlight reference run are tested on the F82.
Still simulated only
History order, clearing fault codes, service interval reset, battery registration, writing injector codes, the coding write check, sunroof, parking brake service position and the diesel functions.
One car so far
Everything marked as working was tested on one car, a BMW M4 (F82). The app targets F- and G-series cars over ENET; support will be listed per model as it is confirmed.
Get notified at launch
Leave your details and you get one message when Bimlogic is in the stores. Questions are welcome too.